banner

Blog

May 19, 2023

In and Out: Demonstrating Boyle's Law

A pressure-filled science project from Science Buddies

Key ConceptsPhysicsGasPressureVolumeBoyle's Law

IntroductionYou have probably opened a soda before and had the liquid fizz right up out of the bottle, creating a huge mess. Why does that happen? It has to do with the carbon dioxide gas that is added to the liquid to make it fizzy. Opening the bottle releases the built-up pressure inside, causing the gas-liquid mixture to rush out the bottle. In this activity you will demonstrate—with the help of air- and water-filled balloons—how a gas changes volume depending on its pressure.

BackgroundThe difference between solids, liquids and gases is how the particles (molecules or atoms) behave. Particles in solids are usually tightly packed in a regular pattern. Although the particles in a liquid are also close together, they are able to move freely. Gas particles, however, are widely spread out and occupy lots of space. They continue to spread to any space that is available. This means that in contrast to liquids and solids, the volume of a gas is not fixed. Robert Boyle, a chemist and physicist from the 17th century, discovered that the volume of gas, meaning how much space it occupies, is related to its pressure—and vice versa. He found that if you pressurize a gas, its volume contracts. If you decrease its pressure, its volume increases.

You can observe a real-life application of Boyle's Law when you fill your bike tires with air. When you pump air into a tire, the gas molecules inside the tire get compressed and packed closer together. This increases the pressure of the gas, and it starts to push against the walls of the tire. You can feel how the tire becomes pressurized and tighter. Another example is a soda bottle. To get carbon dioxide gas into the liquid, the whole bottle is usually pressurized with gas. As long as the bottle is closed, it is very hard to squeeze, as the gas is confined to a small space and pushes against the bottle's walls. When you remove the cap, however, the available volume increases and some of the gas escapes. At the same time its pressure decreases.

One important demonstration of Boyle's law is our own breathing. Inhaling and exhaling basically means increasing and decreasing the volume of our chest cavity. This creates low pressure and high pressure in our lungs, resulting in air getting sucked into our lungs and leaving our lungs. In this activity you will create your own demonstration of Boyle's law.

Materials

Preparation

Procedure

Observations and ResultsDid you see the air inside the air-filled balloon contract and expand? Without closing the tip of the syringe with your finger, you can easily push on the plunger. The air can escape through the opening at the tip of the syringe. But when you close the syringe with your finger the air can't escape anymore. If you press on the plunger, you increase the pressure of the air and thus the air in the balloon contracts or decreases its volume. You should have seen the air-filled balloon shrivel up and get smaller in size. The opposite happens when you close the opening of the syringe and pull the plunger back. This time you decrease the pressure of the air inside the syringe—and its volume increases. As a result the air-filled balloon expands and grows in size: a perfect demonstration of Boyle's law!

The results look different with the water-filled balloon. Although you are compressing the air inside the syringe when pressing on the plunger, the water inside the balloon does not get compressed. The balloon stays the same size. The water balloon also keeps its shape when pulling out the plunger while closing the tip of the syringe. In contrast to gases, liquids are not compressible as their particles are already very close together. Boyle's law only applies to gases.

If you filled the syringe with water as well, you should still have seen the air-filled balloon shrinking while pushing the plunger into the syringe. The air-filled balloon also should have expanded when pulling the plunger out while the tip of the syringe was closed. You might have noticed, though, that you were not able to push and pull the plunger in and out as far as you could with the air-filled syringe. This is again because of the fact that liquids cannot be compressed like gases. You should have observed that also when trying to push the plunger in or pull it back in the water-filled syringe with the water-filled balloon. It was probably impossible to move the plunger in and out!

More to ExploreBoyle's Law, from NASAThe ABC's of Gas: Avogadro, Boyle, Charles, from TED-EdPuffing up Marshmallows, from Scientific AmericanHow Do We Breathe?, from Scientific AmericanSTEM Activities for Kids, from Science Buddies

This activity brought to you in partnership with Science Buddies

Saima May Sidik

Meghan Bartels

Kate Wong

Daniel Cusick and E&E News

Brianne Kane

H.-S. Philip Wong | Opinion

Key Concepts Introduction Background Materials Preparation Procedure Extra Observations and Results More to Explore
SHARE